MAN0923_Issue 3_04/15
Touchpoint Pro
Operating Instructions
157
11. Certification
Touchpoint Pro is a fully customizable installation, so it is not possible to certify all of the possible variations
in one guide. Instead each purchased system will have its personalized parameters inscribed on a label
attached to each major component (i.e. Controller, Remote, and Battery Box).
For Certification and Information purposes, an overview is given in the tables in Chapter 10, Specifications.
Note 1:
The Touchpoint Pro system contains a number of COTS items that are / have been certified by their
manufacturers, and their certified parameters have been incorporated into these tables.
Note 2:
OEMs are responsible for ensuring that their systems are certified in accordance with these tables
and any 3rd-party requirements.
Note 3:
Power Supply Fluctuations are not to exceed DC 18 – 32 V SELV Supply or ±10 % of nominal.
Note 4:
All equipment in this manual is rated to +2000 m (6562 ft) altitude maximum.
WARNING
Ambient temperature: Dependent on components fitted, check individual rating plates.
AVERTISSEMENT
Température ambiante : elle dépend des composants assemblés, vérifier individuellement les
plages de température.
