ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
84
997-457-000-8, Issue 8
January 2010
5.7.3 Evacuation
The Evacuation option has two states, Yes (Y) and No
(N). This option is available with the Fire, Pre-Alarm and
Device Inputs rules. To change the Evacuation setting:
1
Press the ‘
3
’ button (using the numeric keypad) to
select the Evacuation option from the menu below.
2
Press the ‘
6
’ button to select the required setting.
Refer to
Section 5.7, Control-By-Event Output
Rules
for further information.
3
Confirm the selection by pressing the ‘
5
’ button. To
cancel the selection, press ‘
4
’ button. In either case
the menu below is re-displayed.
5.7.4 Silence
The Silence option has two states, Yes (Y) and No (N).
This option is available with the Fire, Pre-Alarm and
Device Inputs rules. To change the Silence setting from
the CBE Output Rules menu:
1
Using the numeric keypad, press ‘
4
’ to select the
Silence option from the menu below.
2
Press the ‘
6
’ button to select the required setting.
Refer to
Section 5.7, Control-By-Event Output
Rules
for further information.
3
Confirm the selection by pressing ‘
5
’. To cancel
the selection, press ‘
4
’ button. In either case the
menu below is re-displayed.
CBE Rule:01
1:Type
2:Filter
3:Evac
4:Silence
5:Interrupt
¦
: More
CBE Rule:01
Evacuate = [Y]
>:Change
:Accept
< : Cancel
CBE Rule:01
Evacuate = [N]
>:Change
:Accept
< : Cancel
CBE Rule:01
1:Type
2:Filter
3:Evac
4:Silence
5:Interrupt
¦
: More
CBE Rule:01
1:Type
2:Filter
3:Evac
4:Silence
5:Interrupt
¦
: More
CBE Rule:01
Silence = [N]
>:Change
:Accept
< : Cancel
CBE Rule:01
Silence = [Y]
>:Change
:Accept
< : Cancel
CBE Rule:01
1:Type
2:Filter
3:Evac
4:Silence
5:Interrupt
¦
: More
6
3
5
6
5
4
