ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
40
997-457-000-8, Issue 8
January 2010
[Setup]
Un-mute = On new point alarm
> : Change
¦
: More
< : Exit
6
1
Language screen is displayed first.
2
Press the ‘
2
/
8
’ buttons to step through the Panel
Options menus until the LED 2C Mode screen is displayed.
3
Press the ‘
6
’ button to toggle the LED function.
4
Press ‘
4
’ to return to the Setup menu screen. All
changes will be saved on exiting.
5.5.1.6 Un-mute
This option is used to control how new alarms un-mute
the internal buzzer, i.e. new alarms occurring in zones
not previously in alarm or for any new device going into
alarm. To set the desired un-mute option:
1
From the Setup menu screen, using the numeric
keypad press the ‘
1
’ button to enter the Panel
Options menu. The Language screen is displayed first.
2
Press the ‘
2
/
8
’ buttons to step through the Panel
Options menus until the Un-mute screen is displayed.
3
Press the ‘
6
’ button to toggle between ‘On new zone
alarm’ and ‘On new point alarm’ input options.
4
Press ‘
4
’ to return to the Setup menu screen. All
changes will be saved on exiting.
5.5.1.7 Diagnostic Mode
The Diagnostic Mode option allows extended fault and
fire reporting and determines whether events are
suppressed until confirmed. To enable Diagnostic Mode:
1
From the Setup menu, using the numeric keypad
press the ‘
1
’ button to enter the Panel Options menu.
The Language screen is displayed first.
[Setup] Language =
English
> : Change
¦
: More
< : Exit
[Setup]
Un-mute = On new zone alarm
> : Change
¦
: More
< : Exit
1
or
8
2
[Setup] Language =
English
> : Change
¦
: More
< : Exit
[Setup] Language =
English
> : Change
¦
: More
< : Exit
[Setup]
LED 2C =
Pre-alarm
> : Change
¦
: More
< : Exit
1
or
8
[Setup]
LED 2C =
Sounders Silenced
> : Change
¦
: More
< : Exit
6
2
