ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
86
997-457-000-8, Issue 8
January 2010
5.7.7 Two Zone
The Two Zone option has two states, Yes (Y) and No
(N). This option is available with the Fire, Pre-Alarm and
Plant Warning rules. To change the Two Zone rule setting:
1
Press the ‘
7
’ button (using the numeric keypad) to
select the Two Zone option from the menu below.
2
Press the ‘
6
’ button to select the required setting.
Refer to
Section 5.7, Control-By-Event Output
Rules
for further information.
3
Confirm the selection by pressing the ‘
5
’ button. To
cancel the selection, press ‘
4
’. In either case the
menu below is re-displayed.
CBE Rule:01
6:Class Change
7:Two Zone
9:Zones
¦
: More
CBE Rule:01
Two Zone = [N]
>:Change
:Accept
< : Cancel
CBE Rule:01
Two Zone = [Y]
>:Change
:Accept
< : Cancel
CBE Rule:01
6:Class Change
7:Two Zone
9:Zones
¦
: More
6
5
7
