ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
61
997-457-000-8, Issue 8
January 2010
5.5.5.3 Day Mode Start
This option enables the start of the day mode period to
be set manually (default) or automatically.
Digital Input 1 can be configured for manual activation of
day mode (see Section 5.5.3.4). When the day mode
period is activated via Digital Input 1, a continuous (rather
than momentary) condition is required. However, if a day
mode period has been configured (refer to Section 5.5.5.1
Day Mode Activity) and is currently active, an input via
Digital Input 1 will de-activate day mode until it is released
or the day mode activation expires at the end of the set
period. Delays to outputs, manually-activated using Digital
Input 1, will be cancelled automatically at the end of the
set day mode period. To set Day Mode Start:
1
From the Setup menu screen, press the ‘
5
’ button
on the numeric keypad to enter the Day/Night Settings
menu. The Day Mode Activity screen is displayed first.
2
Press the ‘
2
/
8
’ buttons to step through the Day/
Night Settings options until the Day Mode Start screen
is displayed.
3
Press the ‘
6
button to select Automatic:
4
Press ‘
4
’ to exit and return to the Setup menu
screen.
5
[Setup]
Day mode activity = DISABLED
> : Change
1 : Disable
¦
: More
< : Exit
[Setup]
Day Mode start =
Manual
> : Change
¦
: More
< : Exit
[Setup]
Day Mode start =
Automatic
> : Change
¦
: More
< : Exit
