Honeywell HRHT4041, User Manual

Page: 43 / 174

Viewing Live Video
31
Configuring PTZ Connection Settings
Before you can control a PTZ camera with the DVR, you must configure the PTZ connection
settings.
To configure the PTZ connection settings
1. Go to Main Menu

Setting

System .
2. In the left navigation pane, click PTZ .
Figure 3-7
3. Configure the following settings:
•
Channel Select the channel (camera) that you want to configure PTZ settings for.
•
Control Mode Select HQA.
•
Protocol Select the camera’s PTZ control protocol from the list.
•
Address
Enter the camera’s address (ID).
•
Baudrate Select a value between 1200 and 115200. The default setting is 9600.
•
Data Bits Select a value between 5 and 8. The default setting is 8.
•
Stop Bits Select 1, 1.5, or 2. The default setting is 1.
•
Parity Select None , Odd , Even , Mark , or Space.
4. Click Apply , and then click Save to save your settings and exit.