Honeywell HRHT4041, User Manual

Page: 25 / 174

Getting Started
13
Device Initialization
If it is your first time to use the device, please set a login password of admin (system default
user).
Note
For your device safety, please keep your login password of admin well after the
initialization steps, and change the password regularly.
Steps:
1.
Boot up device. The device displays device initialization interface. See Figure 2-2 .
Figure 2-2
2. Set login password of admin.
User name:
The default user name is
admin
.
Password/confirm password:
The password ranges from 8 to 32 digitals. It can contain
letters, numbers and special characters (excluding “'”,“"”,“;”,“:”,“&”) . The password shall
contain at least two categories. Usually we recommend the strong password.
Prompt question:
If you set the prompt question here. On the login interface, click ,
device can display the corresponding prompt question for you to remind the password.
WARNING
STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong
password of your own choosing. We also recommend you change your password periodically
especially in the high security system.
3.
Click Next . The device goes to unlock pattern interface. See Figure 2-3 .