Configuring Network Settings
81
Configuring SNMP Settings
You can use Simple Network Management Protocol (SNMP) to receive information from the
DVR remotely. You will need to install SNMP software on a PC to receive information from the
DVR via SNMP.
To configure SNMP settings
1.
Go
to
Main Menu
Setting
Network
SNMP.
Figure 9-10
2.
On the SNMP page, select the Enable check box to enable SNMP.
3.
Configure the following settings:
•
Version
Select the check boxes of the SNMP version(s) that
you are using.
•
SNMP Port
The default setting is
161
.
•
Read Community
The default setting is
public
.
•
Write Community
The default setting is
private
.
•
Trap Address
Enter the IP address of the computer running
SNMP software.
•
Trap Port
The default setting is
162
.
4.
If SNMP Version
V3
is selected, the following settings are also configurable:
ReadOnly User:
The default setting is
public
.
Read/Write User:
The default setting is
private
.
Authorize Type:
Select the authorization type,
MD5
or
SHA
, for both the
ReadOnly and Read/Write users. The default setting is
MD5
.
Summary of Contents for HRHT4041
Page 2: ...Issue Date Revisions A 04 2018 New document ...
Page 6: ......
Page 96: ...Performance Series HQA Digital Video Recorder Local User Guide 84 Figure 9 13 ...
Page 173: ......
