Performance Series HQA Digital Video Recorder Local User Guide
82
Password:
Enter the authorization passwords for both the ReadOnly and Read/Write
users.
Encryption Type:
Select the encryption type for both the ReadOnly and Read/Write users.
The default setting is
CBC-DES
and is currently the only encryption option.
Password:
Enter the encryption passwords for both the ReadOnly and Read/Write users.
5.
Click
Apply
to save your settings.
6.
If you want to exit the Setting menu, click
Save.
Configuring Multicast Settings
Multicast allows for simultaneous real-time monitoring of live video from the DVR at multiple
remote locations over the network.
To configure multicast settings
1.
Go to
Main Menu
Setting
Network
Multicast
.
Figure 9-11
2.
On the Multicast page, select the Enable check box to enable multicast.
3.
In the IP Address box, enter a multicast IP address. The address must be valid for
multicasting and should be in the range 224.0.0.0 to 239.255.255.255 for IPv4 or have
the prefix ff00::/8. An address in the range 239.252.0.0 to 239.255.255.255 is
recommended.
4.
In the Port box, enter a multicast port number or use the default setting (36666).
5.
Click
Apply
to save your settings.
6.
If you want to exit the Setting menu, click
OK
.
Summary of Contents for HRHT4041
Page 2: ...Issue Date Revisions A 04 2018 New document ...
Page 6: ......
Page 96: ...Performance Series HQA Digital Video Recorder Local User Guide 84 Figure 9 13 ...
Page 173: ......
