Configuring System Settings
123
Configuring Video Matrix Settings
You can configure the matrix output channel, including the resolution and window split, and
its interval.
To configure Video Matrix settings
1.
Go to
Main Menu
Setting
System
Video Matrix
.
Figure 12-8
2.
On the Video Matrix tab, configure the following settings:
•
Enable
Select the check box to enable the zero-channel
function or clear the check box to disable it.
•
Interval
This is the interval the DVR waits before sending
out email notifications after an event is detected.
Enter a time between
0
and
1440
minutes. 0 means
that there is no interval.
•
Resolution
Select the desired video resolution from the list. The
default setting is
D1
.
•
Window Split
Select from the drop-down list. BNC supports only
1-split mode. HDMI supports 1/4/9/16-split mode.
3.
Click
Add
to add a channel group.
4.
Click
Apply
to save your settings.
Other Functions/Buttons
Modify
- Double-click a channel or select a channel, then click
Modify
to change the
current channel setup.
Delete
- Click to remove a selected channel group.
Move Up
- Click to move the current selected channel group up the list.
Summary of Contents for HRHT4041
Page 2: ...Issue Date Revisions A 04 2018 New document ...
Page 6: ......
Page 96: ...Performance Series HQA Digital Video Recorder Local User Guide 84 Figure 9 13 ...
Page 173: ......
