background image

H12AE52004

4 LEDs

1 M

DC 12V

View 360°

360°

720P

LENS

30/25 FPS

720P

DVR

4CH

optional

Extending

Vehicle Camera Appearance

Vehicle Camera Installation Diagram

1

2

3

5

6

4

1. Lens 1 (Front)

2. Lens 2 (Right)

3. Lens 3 (Inner) 

4. Lens 4 (Left)

5. Cable collect slot

6. 3M Double-side tape

1.  Install camera on windshield by 

     adhesive bracket

2. Pick up a best location for 

     installation.

4. To connect power 
cable to Mini USB hole.

3.  To adjust a best view angle.

5. To connect the other end 
with the “Video In” slot in DVR.

      

Light Signal

4 CH DVR / All in one Camera
Vehicle Surveillance Camcorder

 Standard Set

(1) Device 

(2) Camera 

(3) Power cord (black/blue/red) 

(4) Alarm cable

(5) IR extension cord 

(6) Remote controller 
Optional Accessories

(1) USB interface SD card reader.

(2) 4/8/16/32G Class10 above SD card。

(7) Microphone 

(8) Velcro strap 

(9) Double-side3M tape

(10) Bracket mount  

(11) CD 

(12) Quick start guide

(3) GPS Module

(4) USB WIFI

(5) External connect Vehicle Camera 

Accessories

Installation Precautions

1. Make sure power connections clear enough to you before installation.

2. System installation is required professional installers and ventilation space.

3. Please use recommended and genuine storage device.

4. Please contact local dealers in case of service requirement.

In Use Precautions

1. Please keep the inner components off any solid or liquid.

2. Please do not disassemble the equipment for warranty issue. Please contact local

    dealers or the manufacturer for prompt service.

3. Please remove the battery if remote control keeps idle for quite a long while.

4. The equipment best connects with ground wire in case of outdoor cameras connection

    or alarm I/O connection. This is to keep the DVR away from static electricity damage. 

Surrounding

1. Please have the DVR under recommended temperature away from the sun and

    heating source.

2. Please keep this equipment away from humid surrounding.

3. Please keep this equipment away from smoke and dust.

4. Please do not drop the equipment.

5. Please keep this equipment in ventilation space.

6. Please supply rated voltage and Amp. To the equipment.

7. Please keep flammable objects away from the equipment.

Safety Precautions

Mobile DVR Dimension

7

10

8

9

11

12

13

14

1

2

3

4

5

6

(1). Power Light      (2). Recording Light     (3). Wifi Light

(4). GPS Light          (5). IR receiver     (6). SD Card Slot

(7). GPS Connector: For connect with G-Mouse to use GPS function. 
       The GPS function includes record vehicle location, speed, longitude and latitude.
(8). EXT: Video output jack, connect with parking assist camera 
(9). MIC: Microphone jack, connect and record audio with microphone.
(10). Composite cables :including video output, audio output and USB connector.
(11). Alarm Input: Alarm input connector, use by parking assist camera.
(12). Camera Connector: Connect with dedicated vehicle camera, which able to record 
         360°surrounding view.
(13). IR Extension Cable Connector: Once upon connecting with the extension cable, 
         the IR receiver will only receive signal from extension cable, cannot control by 
         remote controller.
(14). Power Connector: To cooperate with power management function
          (in OSD), it can provide delay shut down function.

Power Cable (Black/Blue/Red)

1. Positive Port (Red cable): DC8~32V power input.
2. ACC Control (Blue cable): Can setup delay shut 
    down recording after turn off engine.
3. Negative Port(Black cable): GND 

Alarm Cable(Black/Yellow)

1. Positive 12V ALARM Input (Yellow cable): Connect 
    with Positive port on parking assist camera.
2. Negative GND(Black cable): GND 

 Power Light (GREEN)

No light = No power supply. 
Light on = Stable power supply.

 

Recording Light (RED)

No light = No recording.
Light Blinked = Recording. 
Light Blinked Fast = Force recording.

 WiFi Light(Orange)(optional)

No light = Not connecting with WiFi
Light Blinked = WiFi connecting

(NOTE: The device cannot recording during video playback on itself .)

 GPS Light (BLUE)(optional)

No light = Not position yet.
Light Blinked = Position successfully

Viewer

Real Time Monitoring Mode

(1) Monitor Screen Operation Instruction:

• For display 1~4 channel separately, use 

   remote controller switch channel.

• To show quad display, press the quad 

   display button.

• To open menu, press Menu button.
• To playback, press Playback button.

(2) Icon Description:

•         : Recording
•          : GPS sensor position successfully.
•          : Microphone ON
•          : Activate event recording
•          : Alarm

1

2

3

4

0  km/h

Direction and Latitude

」、「

Speed

」、「

Google Map

by GPS function, GPS is optional.

CH3(Vehicle inside

CH1(Front view)

CH2

(Right view)

CH4

(Left view)

Direction and Latitude

Speed

Capture

Configuration

Backup

Playback

Format

Footage playback speed

MAP

G-Sensor

Footage

playback

speed

Volume

Control panel

VVH-MDE52 (Vehicle DVR)

AVM-1276 (Vehicle Cam)

Reviews: