Honeywell CN75, User Manual

Page: 102 / 256

90 75 Series Mobile Computer User Guide
Configure WPA or WPA2 Enterprise (802.1x) Security with Funk Security
Before you set WPA-802.1x or WPA2-802.1x security with Funk security, you need
to configure your authentication server and authenticators. To use TLS protocol,
you also need to load a user and root certificate. On your computer, you need to
enable the radio and set the date.
1. Start Enterprise Settings .
2. Select Communications > 802.11 Radio > Funk Security .
3. Select a Funk security profile to configure.
4. Enter the SSID.
5. For Association, select WPA or WPA2 .
The default encryption is TKIP for WPA or AES for WPA2.
6. For 8021x, select PEAP, TLS, TTLS or EAP-FAST .
7. If you selected TTLS, EAP-FAST, or PEAP:
a. For Prompt for Credentials, select Enter credentials now .
b. Enter a User Name and User Password.
8. If you selected TLS, enter a User Name and Subject Name.
9. Select Yes for Validate Server Certificate.
10. Tap OK .
Configure WPA or WPA2 Personal (PSK) Security with Funk Security
Before you set WPA or WPA2 Personal (PSK) security with Funk Security, you need
to know the pre-shared key for your access point or passphrase for your
authenticator. On your computer, you need to enable the radio and set the date.
1. Start Enterprise Settings .
2. Select Communications > 802.11 Radio > Funk Security .
3. Select a Funk security profile to configure.
4. Enter the SSID.
5. For Association, select WPA or WPA2 .
The default encryption is TKIP for WPA or AES for WPA2.
6. For 8021x, select None .
7. For Pre-Shared Key, enter the pre-shared key or passphrase.
• Enter the pre-shared key (0x followed by 32 hexadecimal pairs) for your
access point.
• Enter the passphrase (8 to 63 ASCII characters) for your authenticator. The
computer internally converts the passphrase to a pre-shared key.
8. Tap OK .