Hioki IM3570, Instruction Manual

Page: 397 / 458

13.1 General Specifications
389
13
Chapte
r 1
3 S
pec
ifications
Low Z High Accuracy Mode Improves measurement accuracy in the 100 m

and 1

ranges of 100 kHz or less.
• The influence of contact resistance is reduced by changing to a circuit configuration that
sets the Lp terminal to 0 V.
• The measurement current is increased (maximum 100 mA, maximum applied voltage 1
V) and the measurement accuracy is improved by setting the output resistance to 10

.
• A contact check (disconnection detection) can be performed for four terminals.
• Cable length compensation is for only 0 m and 1 m.
1 year
At least 60 minutes
Approx. 0.5 ms (100 kHz, representative value, LCD display OFF)
FAST, MED, SLOW, SLOW2
4-terminal structure
Period of guaranteed
accuracy
Warm-up time
Measurement time
Measurement speed
Terminal structure
Backup battery life
Product warranty period
Approx. 10 years (25

C (77

F) reference value)
1.Basic Specifications
Setting range of low Z high accuracy mode
No
Measurement
range
to 1 kHz to 10 kHz to 100 kHz to 1 MHz to 5 MHz
1 100 M

2 10 M

3 1 M

4 100 k

5 30 k

6 10 k

7 3 k

8 1 k

9 300

10 10

11 1

12 100 m

Normal mode only (setting not possible for low Z high accuracy mode).
None
Low Z high accuracy mode/normal mode
2.Function
Monitor functions (1) Monitor voltage
• Monitor range 0.000 V to 5.000 V
• Monitor accuracy
±
10% rdg.
±
10 mV (up to 1.0000 MHz)
±
20% rdg.
±
10 mV (from 1.0001 MHz)
(2) Monitor current
• Monitor range 0.000 mA to 100.0 mA
• Monitor accuracy
±
10% rdg.
±
10

A (up to 1.0000 MHz)
±
20% rdg.
±
10

A (from 1.0001 MHz)
Limit function (1) Current limit (when V or CV)
• Limit range 10

A to 100.00 mA
• Limit accuracy
±
10% rdg.
±
10

A (up to 1.0000 MHz)
±
20% rdg.
±
10

A (from 1.0001 MHz)
(2) Voltage limit (when CC set)
• Limit range 0.005 V to 5.000 V
• Limit accuracy
±
10% rdg.
±
10 mV (up to 1.0000 MHz)
±
20% rdg.
±
10 mV (from 1.0001 MHz)
3
year