manualshive.com logo in svg

Hioki IM3570, Instruction Manual

Share
Download
Hioki IM3570 Instruction Manual Download Page 11

Safety Information

3

Accuracy

We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values, with
the following meanings: 

To ensure safe operation of measurement instruments, IEC 61010 establishes safety standards for vari-
ous electrical environments, categorized as CAT II to CAT IV, and called measurement categories. 

Notation

Marks for individual functions

Indicates the function is enabled in LCR mode.

Indicates the function is enabled in ANALYZER mode.

Indicates the function is enabled in CONTINUOUS mode.

LCR

ANALYZER

CONTINUOUS

Symbols in this manual

Indicates the prohibited action.

p.  )

Indicates the location of reference information.

*

Indicates that descriptive information is provided below.

[     ]

Menus, commands, dialogs, buttons in a dialog, and other names on the screen and the 
keys are indicated in brackets.

CURSOR

(Bold 

character)

Bold characters within the text indicate operating key labels.

Windows

Unless otherwise specified, “Windows” represents Windows 95, 98, Me, Widows NT4.0, 
Windows 2000, Windows XP, Windows Vista or Windows 7.

Dialogue

Dialogue box represents a Windows dialog box.

f.s. 

(maximum display value or 

scale length)

The maximum displayable value or scale length. This is usually the name 
of the currently selected range.

rdg. 

(reading or displayed value)

The value currently being measured and indicated on the measuring in-
strument.

dgt. 

(resolution)

The smallest displayable unit on a digital measuring instrument, i.e., the in-
put value that causes the digital display to show a "1" as the least-signifi-
cant digit.

Measurement categories

CAT II

Primary electrical circuits in equipment connected to an AC electrical outlet by a power cord (portable 
tools, household appliances, etc.) CAT II covers directly measuring electrical outlet receptacles.

CAT III

Primary electrical circuits of heavy equipment (fixed installations) connected directly to the distribution 
panel, and feeders from the distribution panel to outlets.

CAT IV

The circuit from the service drop to the service entrance, and to the power meter and primary overcurrent 
protection device (distribution panel).

Using a measurement instrument in an environment des-
ignated with a higher-numbered category than that for
which the instrument is rated could result in a severe
accident, and must be carefully avoided.
Use of a measurement instrument that is not CAT-rated
in CAT II to CAT IV measurement applications could
result in a severe accident, and must be carefully
avoided.

Summary of Contents for IM3570











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands