Hioki IM3536 Instruction Manual Download Page 228

Page: 228 / 270

224

Troubleshooting

Symptom

Cause

Remedy and Reference

Operation methods

•The instrument

doesn't work. You

don't know how to

use the instrument.

You have not reviewed the user

manual.

Check the appropriate section of this manual.

The instrument is being used in

an automated system.

Consult the administrator or manager of the

instrument or the automated system containing

the instrument.

Measurement

The measurement

values are exhibiting

excessive variation.

The measurement signal level

setting is too small.

Change the signal level setting.

See "Measurement signal level (AC)" (p. 49).

An error is being displayed.

Check items corresponding to the error display,

correct the issue, and then perform measure

ment.

See "11.3 Error Massage and Error Display"

(p. 230).

Reference Value

massage is being displayed,

check measurement conditions such as the

measurement frequency and measurement sig

nal level and select conditions for which

Refer-

ence Value

massage will not be displayed.

See "Guaranteed accuracy measurement level

range" (p. 213), "Measurement frequency (AC)"

(p. 44), and "Measurement signal level (AC)"

(p. 49).

The instrument is being used

in an environment with a large

amount of noise.

If you are using the instrument in a high-noise

environment, consider taking the following mea

sures:

•Use guarding.

See "Appx. 2 Measurement of High Impedance

Components" (p. Appx.3).

•

Implement anti-external noise measures.

See"Appx. 4 Countermeasures Against Incor

poration of External Noise" (p. Appx.5).

•

Separate the sample, measurement cables,

and instrument from the source of the noise

(motor, inverter, electromagnetic switch, power

line, equipment generating sparks, etc.) or

perform the measurement in a separate room.

•Plug the instrument into a grounded outlet.

•

Use a separate power supply from the device

that is generating the noise.

A homemade cable is being

used.

•

Check the wiring method and correct it if nec

essary.

•

Use a Hioki-designated cable and configure

the instrument with the length of the cable

See"5.1 Setting the Cable Length (Cable

Length Correction)" (p. 98).

The connection cable is too

long.

Use a Hioki-designated cable and configure the

instrument with the length of the cable being used.

See "5.1 Setting the Cable Length (Cable Length

Correction)" (p. 98).

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands