Hioki IM3536 Instruction Manual Download Page 134

Page: 134 / 270

130

Deleting a Panel

6.4 Deleting a Panel

This section describes how to delete a panel that has been saved in the instrument’s memory.

Screen display method (For more information, see p. 24.)

(Measurement screen)

SET

key>(

SET

screen)

ADVANCED

tab>

PANEL

key

Select the panel number you wish to

delete with the



keys and then touch

the

OPTION>>

key.

Touch when you wish to

check the information of the

selected panel (p. 127).

Touch when you

wish to cancel

the operation to

delete the panel.

Touch the

DELETE

key.

The

DELETE

dialog box will be displayed.

(You will be able to check some of the con

tents saved in the panel.)

Touch the

DELETE

key.

Touch when you wish to cancel the delete

operation. The dialog box will be closed.

A panel cannot be restored once it is deleted.

Touch the

EXIT

key twice.

Displays the measurement screen.

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands