Hioki IM3536 Instruction Manual Download Page 32

Page: 32 / 270

Screen Layout and Operation

Configuring the instrument’s

interfaces, setting the time and date, and

checking the system (SYS screen)

This screen is used to configure the instrument’s interfaces, to set the time and date, and to check

the system. (LCR mode only)

Touch the

SYS

key.

Touch a tab.

I/F

Configure interface settings

INFO

Check the version and other system

information

TEST

Check the system

CLOCK

Set the time

Touch the key for the parameter you

wish to set.

The settings screen for the parameter will

be displayed.

Check the settings and version number

or perform a test measurement.
See “7 Setting the System” (p. 131).

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands