Hioki IM3536 Instruction Manual Download Page 163

Page: 163 / 270

159

Creating Folders

8.9 Creating Folders

This section describes how to create a folder on a USB flash drive.

Screen display method (For more information, see p. 29.):

(Measurement screen)

FILE

key>(

FILE

screen)

LIST

tab

Insert the USB flash drive into the front

USB connector (p. 138).

Touch the

OPTION>>

key.

Touch the

FOLDER

key.

Enter the save name. (Up to 12 characters)

Changes the keyboard type.

Deletes the

last character.

Deletes all input

characters.

Touch the

CREATE FOLDER

key.

Touch when you wish to cancel the creation

operation. (The dialog box will be closed.)

The folder is created.

Touch the

EXIT

key.

Displays the measurement screen.

Using USB Flash Drive (Saving and Loading Data)

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands