Hioki IM3536 Instruction Manual Download Page 97

Page: 97 / 270

Using Continuous Measurement

Mode

In continuous measurement mode, a series of measurement conditions saved using the panel save

function (p. 124) are loaded in order, and measurement is performed continuously using multiple

different sets of conditions. Measurement can be performed using up to 60 sets of conditions.

First, set the measurement mode to continuous measurement mode (p. 24).

•

Setting the measurement conditions so that the measurement frequency or measurement signal level dif

fers for each panel allows you to simply evaluate the characteristics of the test sample.

•

Continuous measurement can also be performed from the EXT I/O (p. 165).

4.1 Setting Which Panels to Use in Continuous Mea-

surement

Before performing continuous measurement, set which panels to use.

Save the measurement conditions with the panel save function in advance.

See "6.1 Saving Measurement Conditions and Correction Values (Panel Save Function)" (p. 124).

Screen display method (For more information, see p. 24):

(Measurement screen)

SET

key>(

SET

screen)

BASIC

tab

A list of the measurement conditions saved

appears.

Any panel for which only the compensation

value (ADJ) was saved is not displayed.

Use the



key to select a panel for

which to perform continuous measure-

ment, and touch the

key.

OFF

Removes the selected panel from

the targets for continuous mea

surement.

Sets the selected panel as a tar-

get for continuous measurement.

ALL OFF

Removes all panels from the tar

gets for continuous measurement.

ALL ON

Sets all panels as targets for con

tinuous measurement.

INFO

Display the panel information.

Touch the

EXIT

key.

Displays the measurement screen.

4 Using Continuous Measurement Mode

Using Continuous Measurement Mode

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands