Hioki IM3536 Instruction Manual Download Page 157

Page: 157 / 270

153

Saving Settings Data

8.5 Saving Settings Data

Saving instrument settings other than panels

This section describes how to save instrument settings other than panels on a USB flash drive. The

extension of the setting file is “.SET.” This function is convenient for when you want to back up the

setting state of the instrument.

For the settings that are saved, refer to "Appx. 11 Initial Settings Table" (p. Appx.15).

Screen display method (For more information, see p. 29.):

(Measurement screen)

FILE

key>(

FILE

screen)

LIST

tab

Insert the USB flash drive into the front

USB connector (p. 138).

Touch the

SAVE

key.

Touch the

SAVE

key.

Touch when you wish to cancel the

save operation.(The dialog box will

be closed.)

Touch when you wish to change the filename of

the setting file.

(A filename entry dialog box will be displayed.)

The measurement data is saved.

Touch the

EXIT

key.

Displays the measurement screen.

•Touching the

SAVE

key will cause a

SETTING

folder to be automatically created on the USB flash drive,

and setting files will be saved there.

•

Filenames are automatically assigned based on the time and date by default, but they can be changed by

touching the

RENAME

key.

(Example:Saved at 16:31:44 on September 30, 2014→140930163144.SET)

•

If a setting file with the same name already exists, a dialog box confirming whether you wish to overwrite

the file will be displayed.

Using USB Flash Drive (Saving and Loading Data)

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands