Hioki IM3536 Instruction Manual Download Page 160

Page: 160 / 270

156

Loading Instrument Settings

Loading settings files including panel files (ALL LOAD function)

This section describes how to load settings files (

ALL

) including panel files saved on the USB flash

drive with the ALL SAVE function and restore the stored settings.

Screen display method (For more information, see p. 29.):

(Measurement screen)

FILE

key>(

FILE

screen)

LIST

tab

Insert the USB flash drive into the front

USB connector (p. 138).

Select the

SETTING

folder with the



keys and touch the

SELECT

key.

Using the



keys, select the folder

which settings were saved with the all

save function and touch the

SELECT

key.

Using the



keys, select the file

which

TYPE

ALL

and touch the

ALL

LOAD

key.

Touch the

LOAD

key.

When you want to cancel loading, touch this

key. (The dialog box will be closed.)

All files saved in the folder will be loaded

and applied as the current settings.

Touch the

EXIT

key.

Displays the measurement screen.

•

When the load operation is performed, all current instrument settings will be deleted.

•

If the instrument is unable to load the settings file, a beep will sound.

•

Refer to "If a load error is displayed" (p. 155).

Summary of Contents for IM3536















































































































































































































































































Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands

Hioki IM3536, Instruction Manual

Search results

Summary of Contents for IM3536

Reviews:

Related manuals for IM3536

Brands by name

Popular brands