HEIDENHAIN TNC 620, User Manual

Page: 458 / 521

HEROS functions | User administration
10
Setting file access rights
If you transfer files to the
public
directory or create files there, the
control considers the logged-in user as the file owner. The owner can
control access to his own files.
Access rights can only be defined for files located in the
public
directory.
The control automatically assigns the
user
function user
as the owner to any files stored on the
TNC:
drive instead
of the
public
directory.
You can specify the access rights for the following users:
Owner:
The person who owns the file
Group:
A selected Linux group or users with a specific HEIDENHAIN
access right
Other:
All users not belonging to the previously selected Linux group or
not having the specified HEIDENHAIN access right.
You can set access rights as follows:
Read
The file can be viewed
Write
The file can be edited
Run
The file can be executed
Using the soft keys in the
Set advanced access rights
window, you
can select or deselect all access rights for the users:
Select or deselect all access rights for
Owner:
Select or deselect all access rights for
Group:
Select or deselect all access rights for
Other:
Proceed as follows to select the access rights for a group:
Call the
ADVANCED ACCESS RIGHTS
function
Select the desired group in the selection menu
Select or deselect the access rights as required
Any changes made are highlighted in red.
Press
OK
The changes made to access rights are applied.
458
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022