HEIDENHAIN TNC 620, User Manual

Page: 242 / 521

Setup | Tilting the working plane (option 8)
5
Activating manual tilting
Press the
3-D ROT
soft key
The control opens the
Tilt working plane
pop-up
window.
Use the arrow keys to position the cursor on the
desired function
Manual Operation Tool Axis
Manual Operation 3-D ROT
Manual Operation Basic Rotation
Press the
ACTIVE
soft key
If required, use the arrow keys to position the
cursor on the desired rotary axis
If necessary, press the
3-D ROT: AX. VALUES
SPA. ANGLE
soft key
The control now displays the spatial angle input
fields.
If required, enter the tilting angle
Press the
END
key
The input is complete.
By setting the
Manual Operation 3-D ROT
function
to
Active
, you can press the
3-D ROT: AX. VALUES
SPA. ANGLE
soft key to toggle between axis values and
spatial angles.
Manual Operation Tool Axis
Refer to your machine manual.
Your machine manufacturer enables this function.
If the Traverse in Tool Axis function is active, the control displays the
icon in the status display.
You can only move in the direction of the tool axis. The control locks
all other axes.
The traverse is effective in the
T-CS
tool coordinate system.
Further information: "Tool coordinate system T-CS", Page 122
Manual Operation 3-D ROT
If the 3-D ROT function is active, the control displays the icon in
the status display.
All axes move in a tilted working plane.
If a basic rotation or 3-D basic rotation has additionally been saved
to the preset table, it will automatically be taken into account.
The traverses are effective in the
WPL-CS
working plane coordinate
system.
Further information: "Working plane coordinate system WPL-CS",
Page 120
242
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022