HEIDENHAIN TNC 620, User Manual

Page: 500 / 521

Tables and overviews | Machine-specific user parameters
12
Parameter settings
NC stop during tool measurement
True: When the breakage tolerance is exceeded, the NC program is stopped
False: The NC program is not stopped
Change the tool table during tool check and tool measurement
AdaptOnMeasure: The table is changed after tool measurement
AdaptOnBoth: The table is changed after tool check and tool measurement
AdaptNever: The table is not changed after tool check and tool measurement
ProbeSettings
Configuration of a round stylus
TT140_1
Coordinates of the stylus center
[0]: X coordinate of the stylus center with respect to the machine datum [mm]
[1]: Y coordinate of the stylus center with respect to the machine datum [mm]
[2]: Z coordinate of the stylus center with respect to the machine datum [mm]
Set-up clearance above the stylus for pre-positioning
0.001 to 99 999.9999 [mm]
Safety zone around the stylus for pre-positioning: Set-up clearance in the plane perpendicular
to the tool axis
0.001 to 99 999.9999 [mm]
ProbeSettings
Configuration of a rectangular stylus
TT140_1
Coordinates of the stylus center
[0]: X coordinate of the stylus center with respect to the machine datum [mm]
[1]: Y coordinate of the stylus center with respect to the machine datum [mm]
[2]: Z coordinate of the stylus center with respect to the machine datum [mm]
Set-up clearance above the stylus for pre-positioning
0.001 to 99 999.9999 [mm]
Safety zone around the stylus for pre-positioning: Set-up clearance in the plane perpendicular
to the tool axis
0.001 to 99 999.9999 [mm]
500
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022