HEIDENHAIN TNC 620, User Manual

Page: 334 / 521

Pallets | Batch Process Manager (option 154)
8
Opening Batch Process Manager
Refer to your machine manual.
In machine parameter
standardEditor
(no. 102902), your
machine tool builder specifies the standard editor used
by the control.
Programming
operating mode
If the control does not open the pallet table (.p) in Batch Process
Manager as a job list:
Select the desired job list
Shift the soft-key row
Press the
MORE FUNCTIONS
soft key
Press the
SELECT EDITOR
soft key
The control opens the
Select editor
pop-up
window.
Select
BPM-EDITOR
Confirm with the
ENT
key
Alternative: Press the
OK
soft key
The control opens the job list in
Batch Process
Manager
.
Program run, single block
and
Program run, full sequence
operating modes
If the control does not open the pallet table (.p) in Batch Process
Manager as a job list:
Press the
Screen layout
key
Press the
BPM
key
The control opens the job list in
Batch Process
Manager
.
Soft keys
The following soft keys are available:
Refer to your machine manual.
The machine tool builder can configure his own soft keys.
Soft key Function
Collapse or expand tree structure
Edit opened job list
Shows the soft keys
INSERT BEFORE
,
INSERT AFTER
, and
REMOVE
334
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022