HEIDENHAIN TNC 620, User Manual

Page: 430 / 521

HEROS functions | User administration
10
Deactivating user administration
If you deactivate user administration, the control saves all configured
users. Thus they will be available again when user administration is
reactivated.
If you want to delete the configured users upon deactivation, you
need to set this explicitly when deactivating user administration.
User administration can only be deactivated by the following
function users:
useradmin
OEM
SYS
Further information: "HEIDENHAIN function users", Page 442
Deactivate user administration as follows:
Log in as the appropriate function user
Call the user administration
Select
User administration inactive
If necessary, check
Delete existing user databases
to delete
any configured users and user-specific directories
Press the
APPLY
soft key
Press the
END
soft key
The control opens the
System reboot required
window.
Select
Yes
The control triggers a restart.
Creating a useradmin function user
After user administration has been activated, create the
useradmin
function user.
The
useradmin
user is comparable to the local administrator of a
Windows system.
Create the
useradmin
user as follows:
Select
Password for useradmin
The control opens the
Password for user 'useradmin'
pop-up
window.
Set the password for the
useradmin
user
Select
Set new password
The control shows the message
Settings and password for
'useradmin' were changed
.
430
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022