HEIDENHAIN TNC 620, User Manual

Page: 175 / 521

Setup | Moving the machine axes
Handwheel display
1 Only with HR 550FS radio handwheel
: Shows whether the
handwheel is in the docking station or whether radio operation is
active
2 Only with HR 550FS handwheel: Display of field strength, six bars
= maximum field strength
3 Only with HR 550FS radio handwheel : Charging state of battery,
six bars = maximum charging state. A bar moves from the left to
the right during recharging
4
X+50.000
: Position of the selected axis
5
*
: STIB (control in operation); program run has been started or
axis is in motion
6
OFFS +0.000
: Offset values from M118 or from the Global
Program Settings (Option 44)
7
S1000
: Current spindle speed
8
F0:
Feed rate at which the selected axis is moving
9
E
: Error message
If an error message appears on the control, the handwheel
display shows the message
ERROR
for three seconds. Then the
letter
E
is shown in the display as long as the error is pending on
the control.
10
WPL
: 3-D-ROT function is active
Depending on the settings in the 3-D ROT menu, the following is
displayed:
VT
: The function for traversing in the tool axis direction is
active
WP
: Basic rotation function is active
11
RES 0,100
: Active handwheel resolution. Path traversed by the
selected axis with a handwheel revolution
12
STEP ON
or
OFF
: Incremental jog active or inactive. If the function
is active, the control additionally displays the current traversing
step
13 Soft-key row: Selection of various functions, described in the
following sections
10
4
12
8 7 7
3
2
1
7 9
6
5
11
13
5
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
175