HEIDENHAIN TNC 620, User Manual

Page: 74 / 521

Fundamentals | Status displays
3
Positions and coordinates (POS tab)
Soft key
Meaning
Type of position display (e.g., actual position)
Axis positions
Spindle position
Depends on the
spindleDisplay
machine parameter (no. 100807)
Tilt angle of the working plane
Angle of basic transformations
Active kinematics
Principal axes
if they have been defined using the
PARAXMODE
or
POLARKIN
function instead of the
standard
XYZ
.
Global Program Settings (POS HR tab)
Soft key
Meaning
No direct
selection
possible
Current values of
Handwheel superimp.
Active coordinate system
With
M118
: always the machine coordinate
system
Selectable with
GPS
(Global Program
Settings)
Max. val. is defined by
M118
or
GPS
Max. val. and Actl.val. of the selected axes
Status of
Reset VT value
function
The values of all other settings provided by the Global
Program Settings function are displayed on the
GS
tab.
Information on the tools (TOOL tab)
Soft key
Meaning
Display of active tool:
T: Tool number and tool name
RT: Number and name of a replacement tool
Tool axis
Tool length and tool radii
Finishing allowances (delta values) from the tool
table (TAB) and
TOOL CALL
(PGM)
Tool life, maximum tool life (TIME 1) and
maximum tool life for
TOOL CALL
(TIME 2)
Display of programmed tool and replacement tool
74
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022