HEIDENHAIN TNC 620, User Manual

Page: 421 / 521

HEROS functions | Ethernet interface
Settings for network drives
Have a network specialist configure the control.
You can connect network drives to the control. If the control is
connected to a network and the file shares are connected, the
control displays additional drives in the directory window of the file
management
In the
Network drive
area of the
Mount Setup
window, the control
shows a list of all defined network drives and the status of each
drive.
You can define any number of network drives, but only seven can be
connected at a time
In the
Status Log
area, the control shows status information and
error messages.
Open settings
To open the network drives settings:
Press the
PGM MGT
key
Press the
NET
soft key
Press the
DEFINE NETWORK CONNECTN.
soft
key
The control opens the
Mount Setup
window.
10
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
421