HEIDENHAIN TNC 620, User Manual

Page: 84 / 521

Fundamentals | File management
3
To display the dependent files, set the machine
parameter
dependentFiles
(no. 122101) to
MANUAL
.
Additional functions
Protecting a file and canceling file protection
Place the cursor on the file you want to protect
Select the additional functions:
Press the
MORE FUNCTIONS
soft key
Activate file protection:
Press the
PROTECT
soft key
The file is tagged with the "protected" symbol.
Cancel file protection:
Press the
UNPROTECT
soft key
Selecting the editor
Place the cursor on the file you want to open
Select the additional functions:
Press the
MORE FUNCTIONS
soft key
Select the editor:
Press the
SELECT EDITOR
soft key
Mark the desired editor
TEXT EDITOR
for text files (e.g.,
.A
or
.TXT
)
PROGRAM EDITOR
for NC programs
.H
and
.I
TABLE EDITOR
for tables (e.g.,
.TAB
or
.T
)
BPM EDITOR
for pallet tables
.P
Press the
OK
soft key
Connecting and removing USB storage devices
The control automatically detects connected USB devices with a
supported file system.
To remove a USB device, proceed as follows:
Move the cursor to the left-hand window
Press the
MORE FUNCTIONS
soft key
Remove the USB device
Further information: "USB devices on the control", Page 88
84
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022