HEIDENHAIN TNC 620, User Manual

Page: 423 / 521

HEROS functions | Ethernet interface
Adding a network drive
Requirements
Prerequisites for connecting a network drive:
Connection with the network
The control must reach the server in the network
The credentials and the drive path are known
Adding a network drive
To add a network drive:
Select
Add
The control opens the
Mount assistant
window.
Define the settings on the individual tabs
Select
Forward
after each tab
On the
Check
tab, check the settings
Press
Apply
The control connects the network drive.
Settings for the network drive
The control guides you through the settings with the
Mount
assistant
.
Tab Setting
Drive name Drive name:
Network drive name shown in the file
management of the control
The control permits only capitals, with a colon
(
:
) at the end.
Private network drive
When user administration is active, the
connection is only visible to the user who
created it.
To create and edit public
connections, you need the
HEROS.SetShares right. Without
this right, users are able to start
and terminate public connections
but can create and edit only private
connections.
Further information: "Definition of
roles", Page 443
Share type
Transfer protocol
Windows share (CIFS/SMB) or Samba server
UNIX share (NFS)
10
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
423