HEIDENHAIN TNC 620, User Manual

Page: 350 / 521

MOD functions | Setting the counter
9
9.8 Setting the counter
The
Counter
MOD function in the
Counter settings
group allows
you to change the current counter reading (actual value) and the
target value (nominal value).
To define the counter, proceed as follows:
Select the
Counter settings
group in the MOD menu
Define the
Momentary count
Define the
PGM for counter
Press the
APPLY
soft key
Press the
OK
soft key
The control saves the selected settings.
The control applies the defined values to the status display.
The following soft keys are available in the
Counter
MOD functions:
Soft key Function
Reset count
Increase count
Lower count
You can also enter the values directly with a connected mouse.
Further information: "Defining a counter", Page 314
350
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022