HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 27 / 250

General information | Basic operation
3.6 Setting the language
The user interface language is English. You can change to another language,
if desired.
Tap
Settings
in the main menu
Tap
User
The logged-in user is indicated by a check mark
Select the logged-in user
The language selected for the user is indicated by a national
flag in the
Language
drop-down list
Select the flag for the desired language from the
Language
drop-down list
The user interface is displayed in the selected language
3.7 Performing the reference mark search after startup
If the reference mark search after unit start is active, then all of the unit’s
functions will be disabled until the reference mark search has been
successfully completed.
Further information: "Reference marks (Encoder)", Page 90
For encoders with EnDat interface, the reference mark search is omitted
because the axes are referenced automatically.
If the reference mark search is active on the unit, then a wizard will ask you to
traverse the reference marks of the axes.
After logging in, follow the instructions of the wizard
The Reference symbol stops blinking upon successful completion of the
reference mark search
Further information: "Operating elements of the position display", Page 34
Further information: "Activating the reference mark search", Page 116
3.8 User interface
The unit is available in different versions, which are variously equipped.
The user interface and available functions may vary depending on the
version.
I
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
27