HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 36 / 250

General information | Basic operation
I
3.11 Using the function bar
The operation of the function bar may be restricted.
Contact your OEM or Setup user.
Further information: "Function bar", Page 162
3.11.1 Operating elements of the function bar
The function bar provides the following areas and operating elements:
Operating element Function
Quick access menu
The quick access menu displays the current settings:
Unit for linear values (Millimeters or Inch)
Unit for angular values (Radian, Decimal degrees, or Deg-
Min-Sec)
To adjust the settings of the quick access menu, tap the
quick access menu
Further information: "Adjusting settings in the quick access
menu", Page 39
3.11.2 Function elements
Function elements are operating elements that you can add to the function bar and
configure individually.
The following function elements are available:
Basic functions
Function element Short description
Presets
Displays the current preset; tapping opens the preset table
Further information: "Preset", Page 202
Calculator
Tapping opens a calculator with basic mathematical
functions; the last result is shown in the calculator and on
the function bar
Reference mark search (REF)
Tapping starts the reference mark search
Functions for measurements
Function element Short description
Part
Groups all relevant functions; tapping hides all functions that
are irrelevant to the measurement
Further information: "Management of parts", Page 230
36
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022