HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 244 / 250

Information for the Operator user | What to do if ...
III
Fault Cause of fault Correction of fault Personnel
Product does not respond
to remote command
Missing index Use the command
GC/
commands
to read out the
commands
Check whether "true" is in the
"hasIndex" field of the sent
command
Qualified
personnel
RS-232: Product does
not respond to remote
command
Syntax error in the
command file
The texts in the command
file must be written using the
exact same syntax as on the
product itself
Qualified
personnel
Product does not respond
to remote command
Forgotten prefix The prefix
GC/
must be
placed before all commands
Qualified
personnel
Measured value output
(MVO) via REST does not
work
Connection has not
been established
You must first set up a
connection (e.g., using
GC/mvo)
) before you can
transmit measured values
via REST
Qualified
personnel
MVO via REST: Received
data cannot be seen after
triggering the function
via the remote control
command
The wrong tab is open
in the browser
The data are received on
the tab that was used to set
up the
GC/mvo
connection,
and not on the tab of the
remote control command
transmitted for triggering the
function
Qualified
personnel
244
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022