HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 147 / 250

Information for OEM and Setup users | Setup
Only if serial interface has been selected
The Standard and Steinwald data formats transfer measured values only
when the following axis names are assigned: X, Y, Z, Q, R, D, L, W, A, C, f,
Lx, Ly, or Lz.
The minimum, maximum, and range values are transferred only if the
axis names X, Y, or Q are assigned.
Parameter Explanation
Data format for data transfer
Selection of the data format for measured value output
Settings:
Standard
Steinwald
MyFormat1
(template for copying)
Any data formats you have defined yourself
Default value:
Standard
Data format for touch-probe-
triggered data transfer
Selection of the data format for measured value output
Settings:
Standard
Steinwald
MyFormat1
(template for copying)
Any data formats you have defined yourself
Default value:
Standard
Data format for continuous data
transfer
Selection of the data format for measured value output
Settings:
Standard
Steinwald
MyFormat1
(template for copying)
Any data formats you have defined yourself
Default value:
Standard
Data format for switching-
function-triggered data transfer
Selection of the data format for measured value output.
You must assign a digital input for the
Trigger measured value
output
switching function.
Further information: "Switching functions", Page 140
Settings:
Standard
Steinwald
MyFormat1
(template for copying)
Any data formats you have defined yourself
Default value:
Standard
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
147