HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 206 / 250

Information for the Operator user | Preset
III
2.2.4 Probing the preset
You can use a touch probe to determine presets by probing them. The wizard guides
you through each respective step.
Prerequisites:
The touch probe was configured
The desired probing function is configured; the
Select preset
function is
activated
Further information: "Configuring a touch probe", Page 81
Further information: "Configuring probing functions", Page 209
Tap the desired function element on the function bar:
Edge probing
or
Determining the center line
or
Determining the circle center
Follow the instructions of the wizard
Measured values are acquired when the stylus deflects
The product determines the desired position from the
measured values
The
Select preset
dialog box appears
To overwrite an existing preset, select the entry from the
preset table
or
To add a new preset, enter a new number into the
Selected
preset
input field
Confirm the entry with
RET
To overwrite a position value, enter the desired value for the
corresponding axis under
Set position values
Confirm the entry with
RET
or
In order to apply a measured position value as the new zero
point, leave the input fields under
Set position values
empty
Tap
Confirm
in the wizard
The position is applied as preset
206
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022