HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 209 / 250

Information for the Operator user | Probing functions
5 Probing functions
5.1 Configuring probing functions
The probing functions assist you in the acquisition of positions. The wizard guides
you through each respective step.
When configuring the probing functions, you can specify whether the
Select preset
dialog box will be displayed afterwards and whether the measured values will be
transferred automatically to a computer.
Prerequisites:
The touch probe was configured
The optional interface for data transmission was configured
Further information: "Configuring a touch probe", Page 81
Further information: "Configuring the measured value output", Page 234
The following probing functions are available:
Icon Function Scheme
Edge probing
Probe the edge of a workpiece
(one probing procedure)
Determines the coordinate of the
traversed axis
Determining the center line
Determine the centerline of a
workpiece
(two probing procedures)
Determines the coordinate of the
traversed axis
Determining the circle center
Determine the center point of a
circular form (hole or cylinder)
(four probing procedures)
Determines the coordinates of both
axes and the circle diameter
III
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
209