HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 119 / 250

Information for OEM and Setup users | Commissioning
Activating remote access for screenshots
To connect ScreenshotClient with the product via the computer you need to activate
Remote access for screenshots
on the product.
Settings
►
Service
►
OEM area
Parameter Explanation
Remote access for screenshots
Permitting a network connection with the ScreenshotClient
program so that ScreenshotClient can take screenshots of the
unit from a computer
Settings:
ON
: Remote access is possible
OFF
: Remote access is not possible
Default value:
OFF
When the unit is shut down,
Remote access for
screenshots
is automatically deactivated.
4.8 Backing up data
4.8.1
Back up settings
The product’s settings can be backed up as a file so that they are available after
a reset to the factory default settings has been performed or for installation on
multiple units.
Settings
►
Service
►
Back up and restore
Parameter Explanation
Back up settings
Backing up of settings of the product
Complete backup
During a complete backup of the configuration, all settings of the product are backed
up.
Tap
Complete backup
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Select the folder to which you want to copy the configuration
data
Specify a name for the configuration data,
e.g. "<yyyy-mm-dd>_config"
Confirm the entry with
RET
Tap
Save as
Tap
OK
to confirm the successful backup of the configuration
The configuration file was backed up
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
119