HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 126 / 250

Information for OEM and Setup users | Setup
II
5.3.1 Setting the date and time
Settings
►
General
►
Date and time
Parameter Explanation
Date and time
Current date and time of the product
Settings:
Year
,
Month
,
Day
,
Hour
,
Minute
Default setting:
Current system time
Date format
Format in which the date is displayed
Settings:
MM-DD-YYYY
: Month, day, year
DD-MM-YYYY
: Day, month, year
YYYY-MM-DD
: Year, month, day
Default setting:
YYYY-MM-DD
(e.g. "2016-01-31")
5.3.2 Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Settings
►
General
►
Units
Parameter Explanation
Unit for linear values
Unit of measure for linear values
Settings:
Millimeters
or
Inch
Default setting:
Millimeters
Rounding method for linear
values
Rounding method for linear values
Settings:
Commercial
: Decimal places from 1 to 4 are rounded down,
decimal places from 5 to 9 are rounded up
Round off
: Decimal places from 1 to 9 are rounded down
Round up
: Decimal places from 1 to 9 are rounded up
Truncate
: Decimal places are truncated without rounding up or
down
Round to 0 and 5
: Decimal places ≤ 24 or ≥ 75 are rounded to
0, decimal places ≥ 25 or ≤ 74 are rounded to 5
Default setting:
Commercial
Decimal places for linear values
Number of decimal places for linear values
Setting range:
Millimeters
:
0 ... 5
Inch
:
0 ... 7
Default value:
Millimeters
:
4
Inch
:
6
Unit for angular values
Unit for angular values
Settings:
Radian
: Angles in radian (rad)
Decimal degrees
: Angles in degrees (°) with decimal places
Deg-Min-Sec
: Angles in degrees (°), minutes ['] and seconds ["]
Default setting:
Decimal degrees
126
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022