HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 137 / 250

Information for OEM and Setup users | Setup
Creating your own data format
In the file management you will find a file that you can copy to a storage medium
and then adapt it individually on a computer. Then you can copy the new file to the
file storage area of the product and assign it to a function.
Data formats are saved as XML files
Tap
File management
in the main menu
Open in succession:
Internal
User
DataTransfer
The folder contains the file MyFormat1.xml
Copy the file MyFormat1.xml to a transfer medium
Rename file
Edit the file in an XML editor or the computer's text editor
Copy the file from the transfer medium to the following folder
of the product:
Internal
►
User
►
DataTransfer
In order to prevent your data formats from being removed when the
firmware is updated, save each file under a separate name.
When the firmware is updated, the
MyFormat1
file in the
DataTransfer
folder is reset to the status it had when shipped. The file is automatically
recreated if it no longer exists. Other files in the
DataTransfer
folder are
not affected by a firmware update.
Further information: "Managing folders and files", Page 152
Further information: "Activating the interface for Data transfer", Page 146
XML schema of the MyFormat1.xml file
<configuration>
<base id="Settings">
<group id="General">
<group id="Format">
<group id="MyFormat1">
<element id="General" prefix=" " suffix=" " previousValues="false" writeLabel="true" writeUnit="true" writeTimestamp="false" newlineAfterTimestamp="false"/>
<element id="X" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="X MIN" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="X MAX" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="X RANGE" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Y" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Y MIN" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Y MAX" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Y RANGE" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Z" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Z MIN" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Z MAX" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Z RANGE" unit="mm" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Q" unit="deg" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Q MIN" unit="deg" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Q MAX" unit="deg" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
<element id="Q RANGE" unit="deg" base="10" factor="1" newline="false" prefix=" " suffix=" " decimalPlaces="3" digits="0" positiveSign="false"/>
</group>
</group>
</group>
</base>
<base id="version" major="0" minor="0" build="0"/>
</configuration>
1 3 2
4
6
5
Figure 24: Data format MyFormat1.xml
1 Header
2 Name of the data format that appears in the Settings menu
3 General data format settings
4 Settings of the axes
5 Footer
6 End of the data format
II
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022
137