HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 116 / 250

Information for OEM and Setup users | Commissioning
II
Activating the reference mark search
The product uses the reference marks to reference the machine table to the
machine, for example. If the reference mark search has been activated, a wizard
appears on startup of the product and asks the user to move the axes for the
reference mark search.
Prerequisite: The installed encoders have reference marks that have been
configured in the axis parameters.
For encoders with EnDat interface, the reference mark search is omitted
because the axes are referenced automatically.
The automatic reference mark search on startup of the product can be
canceled depending on the configuration.
Further information: "Reference marks (Encoder)", Page 90
Tap
Settings
in the main menu
Tap
Axes
Open in succession:
General settings
Reference marks
Activate
Reference mark search after unit start
with the
ON/OFF
slide switch
The reference marks must be traversed every time the product
is started
The functions of the product will only be available after the
reference mark search has been completed
The Reference symbol stops blinking upon successful
completion of the reference mark search
Further information: "Operating elements of the position
display", Page 34
4.7
OEM area
In the
OEM area
, commissioning engineers can customize the product in various
ways:
Documentation
: Adding the OEM documentation, e.g. service information
Startup screen
: Defining a startup screen with the OEM's company logo
Screenshots
: Configuring the unit for screenshots with the program Screen-
shotClient
116
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022