HEIDENHAIN 548431-05, User Manual, Page: 455 / 722

ICP programming | Contour elements – turning contour
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
455
Undercut DIN 509 E
Programming a DIN 509 E undercut:
Select the form elements
Select
Undercut DIN 509 E
Enter the undercut parameters
Parameters:
I : Undercut depth (default: standard table)
K : Undercut length (default: standard table)
R
:
Undercut radius
(default: standard table)
W : Undercut angle (default: standard table)
U
,
F
,
D
,
DF
:
Further information: "Machining attributes", Page 418
ICP generates a G25 in smart.Turn mode of operation.
The control automatically calculates parameters that have not been
entered from the diameter in the standard table.
Further information: "DIN 509 E – undercut parameters",
Page 686
Undercuts can be programmed only between two linear
elements. One of the two linear elements must be
parallel to the X axis.