HEIDENHAIN 548431-05, User Manual, Page: 670 / 722

Organization mode of operation | Transfer submode
9
670
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Importing NC programs from the connected data medium
Importing NC programs:
Select the Organization operating mode
Press the
Transfer
soft key (login required)
Open the menu with the
Miscellaneous functions soft key
Open the menu with the
Import functions
soft
key
Selection of cycle programs or ICP contours of
the MANUALplus 4110 (*.gtz)
Alternative: Selection of DIN programs of the
MANUALplus 4110 (*.nc/ *.ncs)
Alternative: Selection of programs of the CNC
PILOT 4290 (*.nc/ *.ncs)
Use the cursor keys to select the folder, then
press the
ENT key to switch to the right window
With the cursor keys, select the NC program to
be converted
Alternative: Mark all NC programs
Start the import filter for converting the
program(s) to the format of your control
The names of imported cycle programs, ICP contour
descriptions, DIN programs and DIN subprograms are
given the prefix
CONV_... .
In addition, the control adapts the extension and imports
the NC programs to the correct folders.