HEIDENHAIN 548431-05, User Manual, Page: 281 / 722

Teach-in | Recessing cycles
5
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
281
Axial recess turning
Select Recessing cycle
Select Recess turning
Select Axial recess turning
The cycle machines the rectangle described by the Start point and
the End point contour .
Cycle parameters:
X , Z : Start point
X2 , Z2 : End point contour
P
:
Feed depth
– Maximum infeed depth
O : Recessing feed (default: active feed rate)
B
:
Offset width
(default: 0)
U : Unidir. turning (default: 0)
0: Bidirectional
1: Unidirectional
G47 : Safety clearance
Further information:
"Safety clearance G47", Page 180
T : Tool number – turret pocket number
G14
:
Tool change point
Further information: "Tool change point G14", Page 180
ID : ID no.
S
:
Cutting speed
or
Constant speed
F : Feed per revolution
MT : M after T : M function that is executed after the tool call T
MFS
:
M at beginning
:
M
function that is executed at the
beginning of the machining step
MFE : M at end : M function that is executed at the end of the
machining step
WP : No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW : Angle in the B axis (machine-dependent)
CW
:
Reverse the tool
(machine-dependent)
HC : Shoe brake (machine-dependent)
DF
:
Miscellaneous function
(machine-dependent)
Type of machining for technology database access:
Recess turning