HEIDENHAIN 548431-05, User Manual, Page: 187 / 722

Teach-in | Single cut cycles
5
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
187
Transv. linear maching
Select
Single cuts
Select Transv. linear maching
Select the scope of the cycle:
Off
: When the cycle is completed, the tool
remains at the cycle end position
On : The tool returns to the starting point
Transv. linear maching
: The tool moves from the
Start point
to the End point contour X2 at the programmed feed rate and
remains at the cycle end position.
Transv. linear maching
(
With return
): The tool approaches the
workpiece, executes the transverse cut and returns to the Start
point
at the end of cycle.
Cycle parameters:
X , Z : Start point
Z1 : Start point contour (if With return is active)
X2
:
End point contour
T : Tool number – turret pocket number
G14 : Tool change point (if With return is active)
ID
:
ID no.
S : Cutting speed or Constant speed
F
:
Feed per revolution
MT : M after T : M function that is executed after the tool call T
MFS : M at beginning : M function that is executed at the
beginning of the machining step
MFE
:
M at end
:
M
function that is executed at the end of the
machining step
WP : No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW : Angle in the B axis (machine-dependent)
CW : Reverse the tool (machine-dependent)
HC : Shoe brake (machine-dependent)
DF : Miscellaneous function (machine-dependent)
Type of machining for technology database access:
Finishing
Cycle execution if With return is active:
1 Move from Start point
to
Start point contour Z1
2 Move to End point contour X2 at programmed feed rate
3 Retract and return to
Start point
on paraxial path