HEIDENHAIN 548431-05, User Manual, Page: 638 / 722

Organization mode of operation | Parameters
9
638
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Recessing and contour recessing – Approach and departure
Approach and departure movements are at rapid traverse (
G0 ).
Approach and departure
Parameter
Approach – External recessing
ANESA
Approach – Internal recessing ANESI
Departure – External recessing ABESA
Departure – Internal recessing
ABESI
Approach – External contour recessing ANKSA
Approach – Internal contour recessing
ANKSI
Departure – External contour recessing ABKSA
Departure – Internal contour recessing ABKSI
Approach or departure strategy:
1: Move simultaneously in X and Z directions
2: First X, then Z direction
3: First Z, then X direction
Recessing and contour recessing – Machining
Evaluation:
DIN PLUS
Machining
Parameter Meaning
Recessing width factor SBF SBF is used for calculating the
maximum offset for recessing
cycles
G860 and G866 :
esb = SBF * SB ( esb : effective
recessing width; SB : width of
recessing tool)