
Teach-in | Recessing cycles
5
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
309
Cycle run:
1 Approach the workpiece from the
Start point
to the
Safety
clearance
2 Cut to the depth of the chamfer or rounding and machine the
chamfer/rounding if defined
3 Depending on the cycle parameters, move at the programmed
feed rate to
The turning center, or
The
Inner diameter (pipe)
XE
If you have programmed a feed-rate reduction, the control
switches to the
Reduced feed
E
as soon as the tool reaches
the
Diam. feed reduction
I
.
4 Retract at the end face and return to the
Start point
5 Move to the
Tool change point
according to the setting in
G14
The limit to the
Maximum speed
D
is only effective in
the cycle. After the cycle ends, the speed limit before
the cycle becomes effective.
Summary of Contents for 548431-05
