HEIDENHAIN 548431-05, User Manual, Page: 691 / 722

Tables and overviews | Technical information
10
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
691
User functions
DINplus programming Programming in DIN 66025 format
Extended command format (
IF... THEN ... ELSE...
)
Simplified geometry programming (calculation of
missing data)
Powerful fixed cycles for turning, recessing, recess
turning and thread machining
Powerful fixed cycles for drilling and milling with
the C axis (optional)
Powerful fixed cycles for drilling and milling with
the Y axis (optional)
Subprograms
Programming with variables
Contour description with ICP (optional)
Program verification graphics for workpiece blank
and finished part
Turret assignment, magazine assignment and other
setup information in the DINplus program
Conversion of smart.Turn units into DINplus
command sequences (optional)
Parallel programming
Parallel simulation
Test graphics Graphic simulation of Teach-in cycle sequence,
Teach-in, smart.Turn or DINplus program
Display of the tool paths as pencil-trace or cutting-
path graphics, special identification of the rapid
traverse paths
Motion simulation (2-D material-removal graphic)
Display of programmed contours
Side or face view, or 2-D view of cylindrical surface
for verification of C-axis machining
View of face (XY plane) and YZ plane for verification
of Y-axis machining
Shifting and magnifying functions
3-D graphics for display of workpiece blank and
finished part as solid-model view
Machining time analysis Calculation of machining times and idle times
Consideration of switching commands triggered by
the CNC
Representation of time per individual cycle or per
tool change
TURN PLUS Automatic generation of smart.Turn programs
Automatic cutting limitation through the definition
of chucking equipment
Automatic tool selection and turret assignment/
magazine assignment