HEIDENHAIN 548431-05, User Manual, Page: 501 / 722

ICP programming | Contours in the XY plane
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
501
Rectangle in XY plane
Reference data of XY plane:
ID : Contour
PT : Milling depth
C
:
Spindle angle
IR : Limit diameter
ZR
:
Reference dimension
Parameters of figure:
XM
,
YM
:
Center
A : Position angle
K : Length
B : Breadth
BR : Cham. width or Rounding radius
You can use the
Select reference plane
function to determine the
Reference dimension ZR and the Limit diameter IR .
Further information: "Reference data and nested contours",
Page 472
ICP generates the following:
The
FRONT Y
section code with the
Limit diameter
,
Reference
dimension , and Spindle angle parameters. The section code is
omitted for nested contours.
A
G308
with the
Contour name
and
Milling depth
parameters
A G375 with the parameters of the figure
A G309